Although it may seem straightforward, many people find the procedure quite difficult and end up damaging their engine quite seriously. DriveSmart understands how proper oil maintenance can make an engine last a lifetime, so allow us to explore and master the process of changing an engine’s oil together. It’s likely that we’ve all been exposed to the process of changing an engine’s oil at one point or another in our lives. Whether we watched our parents change it on their car, our friends change it on theirs, our mechanic changing it on ours, or even if we changed it our self – changing the engine’s oil is inevitable.
With that said, it’s safe to assume that we’re all very much aware that our engines require an oil change. However, most of us have little to no understanding of what the oil is used for and why it needs to be replaced.
The engine’s oil has many vital purposes, with the main one being that of keeping the engine running smoothly. Our engines contain many moving parts that all have the potential to rub up against one another, thus creating friction and heat. This friction can severely damage the parts that make up your engine and cause your engine to likely break down altogether.
Engine oil is used in order to keep these parts lubricated in order to reduce the friction and heat generated by the engine’s operation. Engines that overheat are a huge risk to both the vehicle and those inside, as it’s possible that the car can catch fire from the said heat.
Aside from reducing friction and heat within an engine, engine oil is also used in order to keep the engine clean and protect the engine’s parts from corrosion. Interestingly, engine oil also is used in order to improve the engine’s fuel efficiency – something we all could appreciate these days. With that said it is best if all drivers conduct an engine oil check.
Most cars have the ability to show you the remaining life of the oil within your engine in a percentage. If you’re like most drivers, you’ll probably decide that taking your car to a certified mechanic to perform the oil change is the best option. However, prices seem to be rising when it comes to the maintenance of a car, and an engine oil change is no different. With that said, it may be in your best interest to change your engine’s oil on your own in order to start saving some bucks!
While the process of changing engine oil is typically a universal one, not all cars will be guaranteed to follow the same procedure that other vehicles follow. Your vehicle’s manual should explain how to locate and identify the oil filter, how to drain and ultimately replenish the oil within the vehicle.
If your vehicle’s manual instructs that you change the engine oil filter after every 3K-6K miles, you must change the engine oil filter, which is a crucial component. Failure to do so may end up in poor engine performance, or complete engine failure. If your vehicle’s manual instructs only a specific oil type be installed, install only that type of oil. Failure to follow the manual’s instructions can result in a huge repair cost.
Ensure that you are equipped with the following tools generally required to change your vehicle’s engine oil:
*Refer to the “Synthetic vs Conventional Engine Oil” section to understand which type of oil to install into your vehicle.
Changing the engine oil typically takes around 20 minutes or so. You should begin by spreading plastic sheets on the ground in order to avoid oil dripping on the surface below your vehicle.
As you will soon discover from your vehicle’s manual, there is a specific type of oil that your engine requires and should always be filled with. As you make your way to the shop, you will have to decide whether to choose a synthetic oil or a conventional oil.
Synthetic engine oil is made for high-tech engines that are typically found in luxury vehicles such as a Mercedes-Benz or BMW. This type of oil is required to pass intensive quality tests in order to provide a longer lasting performance that is superior when compared to conventional oil. This type of oil is able to flow better at low temperatures and it’s able to maintain high lubricity at high temperatures.
This is the type of oil that most people use, as it’s standard for typical commercial vehicles. 5W-20 and 5W-30 oils are usually recommended by manufacturers, as this type of conventional oil performs well at low temperatures. This type of oil needs to be replaced more often than synthetic oil, with 3,000 miles being the most accepted limit before performing the change.
The viscosity of an engine oil is very important as well. Viscosity is simply defined as the state of being thick, sticky, and consistently semifluid, due to internal friction. Your engine will require a specific level of viscosity and weight from the engine oil in order to function both safely and efficiently.
Viscosity and weight used to be less important for the universal oils of the old days. Read more about how automotive engineering has advanced in engines, where oil pressure is used to regulate valve timing and apply the proper tension to the timing belt or chain.
Again, substituting the manufacturer’s recommendations with your personal preference can result in engine damage, poor performance, and even a “Check Engine” warning. Disregarding the owner’s manual and substituting a different oil for the engine will void any sort of warning, leaving you with a large repair bill for such a silly mistake.
With everything said, it’s no wonder why the processes for changing engine oil are the “driving” reason for people taking their cars in for a professional oil change rather than do it on their own. It should be noted that certified vehicle workshops are liable for the work that they perform and will follow the instructions necessary for your car. To learn how to get all your future oil changes paid for, check out DriveSmart’s Auto Saver’s Club.